-9%
Sold out
Click to zoom in
SKU: 50031
Innovative 96-00 Civic B-Series Black Steel Replacement Rear T Bracket
This black steel rear T bracket from Innovative replaces the factory part in 1996-2000 Honda Civic models equipped with B-Series engines. It locks the rear transmission mount to the chassis for consistent power transfer in high-performance driving. Made from 3/16-inch thick steel with black powder coat finish it withstands torque from B16 and B18 engines without bending or breaking.
Key Features
- CNC Laser-Cut Steel: 3/16-inch thick construction delivers strength and exact fit for dependable performance in B-Series setups.
- Black Powder Coat Finish: Guards against rust and damage from road salt oils and engine heat for long-lasting protection and looks.
- Direct OEM Replacement: Bolts into stock positions on EK Civic chassis with no cutting or drilling for fast straightforward installation.
- B-Series Specific Design: Positions rear transmission mount correctly for B16A B16B B18C engines in Civic engine swaps.
- Lightweight Durability: At 1.1 lbs it offers rigid support to minimize drivetrain shift during hard acceleration.
Product Notes
- Confirm your Civic has a B-Series engine swap before ordering.
- Clean mounting surfaces for best adhesion of powder coat over time.
- Packaged in protective foam insert within a 6 x 4 x 2 inch box for safe transit.
Installation Notes
- Professional installation recommended.
- Torque bolts to 28 ft-lbs using OEM or grade 8 hardware.
- Compatible with Innovative rear transmission mounts and factory Civic subframe.
This Part Fits
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1996-2000 | Honda | Civic | CX |
| 1996-2000 | Honda | Civic | DX |
| 1996-2000 | Honda | Civic | EX |
| 1998-2000 | Honda | Civic | GX |
| 1996-2000 | Honda | Civic | HX |
| 1996-2000 | Honda | Civic | LX |
| 1999-2000 | Honda | Civic | Si |
| 1999 | Honda | Civic | Value Package |
Why Choose Innovative?
- Over 20 years engineering Honda performance mounts and brackets.
- Made in USA with premium materials for daily and track use.
- Laser-cut precision matches OEM specs while adding strength.
Frequently Asked Questions
-
Q: Will this fit a B18C1 swap in my 1998 Civic EX?
A: Yes it fits all B-Series engines including B18C1 in 96-00 Civic chassis with no alterations. -
Q: What material and finish does it have?
A: 3/16-inch mild steel with a black powder coat finish that withstands engine bay heat up to 400°F. -
Q: What is the warranty and install process?
A: Lifetime warranty against defects. Bolt-on install takes 15-30 minutes with basic hand tools.
Shipping & Handling
- Method: USPS Priority or UPS Ground
- Availability: In stock - ships same or next business day
- Packaging: Securely boxed at 6 x 4 x 2 inches
- Weight: 1.1 lbs
Brackets
Brackets and mounting hardware for trucks, SUVs, and performance cars are stocked at Black Ops Auto Works. Shop bumper mounting brackets, light bar and sensor relocation brackets, exhaust hanger kits, leaf spring and track bar brackets, caliper brackets, and roof rack mounting brackets for Ford, RAM, Chevrolet, Jeep, Subaru, and Toyota platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 472 bracket SKUs across bumper, suspension, exhaust, and accessory mounting categories. What This Category Covers Brackets are the mounting hardware that secures bumpers, light bars, sensors, exhaust systems, suspension components, and roof accessories to a vehicle chassis or body. Because brackets support such a wide range of systems, this collection spans multiple vehicle platforms and use cases rather than a single category, from off-road bumper hardware to exhaust hanger kits to suspen...
View Brackets Products
Fabrication
Shop Fabrication Parts and Materials at Black Ops Auto Works for stainless steel tubing, titanium tubing, aluminum charge piping, mandrel bends, V-band clamps, flanges, merge collectors, AN fittings, PTFE hose kits, braided fuel and oil lines, heat shields, welding supplies, brackets, bungs, and hardware for building custom exhaust systems, turbo plumbing, intercooler piping, and fuel system routing. Start with tubing in stainless, titanium, or aluminum in the right diameter and wall thickness, then add mandrel bends, flanges, V-bands, and clamps to complete the joint work. Black Ops Auto Works carries 5,866 fabrication SKUs from Vibrant Performance, Ticon Industries, Stainless Bros, Radium Engineering, Fragola, DEI, and ATP Turbo. Why Custom Fabrication Custom fabrication solves fitment problems that no universal or pre-bent kit can address. Raw tubing, flanges, and fittings give the fabricator freedom to route exhaust around a turbo, snake charge pipe around accessories, hard-...
View Fabrication Products
Innovative Mounts
Innovative Mounts Innovative Mounts engine and transmission mount kits serve Honda and Acura enthusiasts building Civic, Integra, RSX, TSX, Accord and CR-V platforms with B-series, K-series, D-series, H-series and F-series powertrains. Black Ops Auto Works carries 183 Innovative Mounts SKUs including polyurethane engine mount kits, transmission mounts, replacement bushings, traction bars, crossmembers and swap-specific mounting hardware with vehicle filters. What This Innovative Mounts Collection Covers Innovative Mounts products focus on Honda and Acura chassis applications, including Civic, CRX, Integra and RSX builds. The selection also includes select Jeep Wrangler, Ford, Nissan and Mitsubishi applications, all of which must be matched by exact engine and chassis details. Honda and Acura Engine Mount Kits Mount kits locate the engine and transmission for a specific chassis and swap combination. Select the exact chassis generation, engine family, transmission type and mount s...
View Innovative Mounts Products