Skyjacker 2019+ Jeep Wrangler (JL) 2-2.5in Component Box w/2 Front & 2 Rear ADX 2.0 Reservoir Shocks

Reservoir Shock Performance for a Fully Dialed Wrangler JL

The Skyjacker JL2025X component box gives 2018-2023 Jeep Wrangler JL owners a complete 2 to 2.5 inch lift solution with two front and two rear ADX 2.0 remote reservoir shocks. The ADX 2.0 shocks in the JL2025X separate fluid and gas chambers through an external reservoir, which helps control heat buildup and reduces fade during extended off road runs or repeated washboard sections.

Because the JL2025X is packaged as a complete component box, front and rear shocks arrive matched in valving and travel, so the Wrangler rides evenly at all four corners after installation. The 2 to 2.5 inch lift range built into the JL2025X is enough to clear larger tires while keeping factory driveline angles reasonably close to stock, which helps minimize the need for additional correction parts on most Wrangler JL builds.

Key Features

• Complete 2 to 2.5 inch lift component box
• Two front and two rear ADX 2.0 remote reservoir shocks
• External reservoir design reduces fluid aeration and fade
• Matched valving front to rear for even ride quality
• Clears larger tire and wheel packages
• Built for the Wrangler JL platform

Fitment

Specifications

What's Included

• Front ADX 2.0 remote reservoir shocks, pair
• Rear ADX 2.0 remote reservoir shocks, pair
• Reservoir mounting hardware
• Shock mounting hardware

About Skyjacker

Skyjacker has engineered suspension lift systems and shocks since 1970, and the ADX line represents the brand's advanced reservoir shock technology for serious off road Wrangler builds. The JL2025X brings that same reservoir shock performance to a moderate 2 to 2.5 inch lift package.

Related Parts

• Skyjacker Gladiator Front Rear Control Arm Component Box

FAQ

The JL2025X is a Skyjacker component box that provides a 2 to 2.5 inch lift for the Jeep Wrangler JL using ADX 2.0 remote reservoir shocks front and rear.

The JL2025X fits 2018-2023 Jeep Wrangler JL models across Sport, Rubicon, and Sahara trims.

The JL2025X includes four ADX 2.0 remote reservoir shocks, two front and two rear.

The JL2025X provides a 2 to 2.5 inch lift depending on final ride height setup.

Remote reservoir shocks separate fluid and gas chambers to reduce fade and maintain consistent damping during extended off road use.

The JL2025X component box is focused on the ADX 2.0 shock package; springs are sold separately depending on the build.

Professional installation is recommended for the JL2025X to ensure correct reservoir mounting and torque specifications.

The JL2025X fits both two door and Unlimited four door Wrangler JL models across the listed trims.

Install Instructions

1. Raise and support the Wrangler on jack stands at all four corners.
2. Remove factory front and rear shocks.
3. Install the JL2025X front ADX 2.0 shocks at factory mounting points.
4. Mount the front remote reservoirs in their designated bracket locations.
5. Install the JL2025X rear ADX 2.0 shocks at factory mounting points.
6. Mount the rear remote reservoirs in their designated bracket locations.
7. Torque all mounting hardware to specification and check reservoir hose clearance.
8. Lower the vehicle and cycle suspension through full travel to verify clearance.

Prop 65 Warning

This product can expose you to chemicals including chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.